BLOXYGEN is a pressurized can of inert gases that prevents Waterlox and other oil based finishing liquids from drying out during storage.

PROBLEM: Oil-based products dry and harden by absorbing oxygen. When we store these products, the oxygen that's sealed in the container continues to cure and thicken the product, eventually forming a skin over the top. This skin is wasteful, time consuming, and messy to remove. Sometimes, hardened particles can clog spray guns, run the final finish, or destroy the remaining liquid.

SOLUTION: Simply, we need to prevent any oxygen from reacting with the finish. By using a blanket of protective gas to purge the container, you can store your finish safely and use ALL your finish, not just the first half.

HOW DOES IT WORK?
Bloxygen uses a special blend of inert gases to drive the oxygen out of your container. Simply blow the oxygen out of your container with Bloxygen and then seal the lid. The heavy, inert Bloxygen gases sink down to block oxygen from the liquid surface. Because Bloxygen is heavier than air, it will separate the liquid surface from any air that may remain in the container.

BENEFITS
 

Use all your finish, not just the first half
Eliminate spray gun clogs and jams
Reduce your hazardous waste / product loss
Avoid paying a premium for small volumes of finish
Improve the quality of the final application
Prevent changes in product chemistry during storage
Save time by making finishing projects easier and cleaner
Store your leftovers safely, in the original, labeled container
 

APPLICATIONS
Use BLOXYGENtm anytime you are storing:

Fine Finishes
Oil-based Paints
Varnishes
Oil-based Stains
Resins
Paste wood fillers
Polyurethanes
Oil-based Inks
Photography Chemicals
Polished Metals
 

BLOXYGEN will NOT HELP problems with WATER-BASED FINSIHES or LACQUER. These products don't cure via oxygen absorption.

1 Can $11.63

5 Cans $53.15

10 Cans $99.50

20 Cans $179.00

Number Of Cans Ordered

1 Can $11.63 5 Cans $53.15 10 Cans $99.50 20 Cans $179.00

Send mail to woodfloors23@the-flooring-connection.com with questions or comments about this web site.
Copyright © 2003 The Flooring Connection
Last modified: 10/11/08