Model 50P 18 Gage Pneumatic Nailer                 The Model 50P is a pneumatic Powernailer® designed for 18 gage cleats. The 50P is recommended for use on 3/8", 1/2" and 5/8" Tongue and Groove flooring as well as some 3/4" exotics, bamboo, and other solid wood flooring. The model 50P uses a thinner 18 gage cleat that is less likely to split the tongue on thinner woods.  It is also recommended for flooring that is a very hard species like hickory. Many of the hard exotics available today require a thinner cleat to penetrate without splitting the tongue. The standard configuration is (L/S), Long Handle with Short Channel, which holds 100 Powercleats®.  Long handle configuration provides 18" height from floor to handle grip. Nailer package includes a White 3mi Mallet, 1 adapter pad, 4 shims and 2 Allen wrenches, user manual, lube oil, extra driving blade and 2 box wrenches. Requires a 70 to 110 psi air compressor.

• Designed for 1”, 1-1/4” and 1-1/2” 18 gage (.050”) nails.
• 3 Handle lengths available (11-3/4", 18" and 21")
• Uses plastic No-Mar pad and easy-to-change shims to accommodate different flooring thicknesses.
• Safety trigger—Prevents accidental firing.
• Rugged cast aluminum body and adapter foot.
• Pressure sealed body eliminates leaks.
• Replaceable seals, cylinder sleeve and driving blade.
• Extruded aluminum nail channel is hard coated
to resist wear.
• Holds 1 clip of nails (approx. 100 nails) if ordered with short nail channel and 2 clips of nails (approx. 200 nails)
if ordered with long nail channel.
• 3/8” air inlet for faster recycling.
• Weighs approximately 10 pounds.
• Operates at 80-100 psi.
• Complete with 3MI white mallet.
• 1 Year limited warranty.

For Exotic and Solid Hardwoods

Comes with White 3mi mallet, 1 adaptor pad, 4 shims, 2 Allen wrenches and lube oil