Shared Top Border

 

   Wood Doctor Repair Kit

 

 

Left Border

                                        

 

                         

Home
Up
Products
Safecoat Products
Services
Credit Application
Message Board
Other Useful Links
Privacy Statement
Help Placing My Order
Buy gift certificates
Lowest Prices Guaranteed
Legal
Mailing List
Wagner Moisture Meters
Pro - Team Professional Vacuums
Floor Prep Products And Carpet Installation Tools
Stair Treads & Risers
Shipping Policies
Slip Tongue's
Barwalt Tools
Bulk Flooring Supplies
Measuring tools, Marking tools, Hand tools
Site Community

The Flooring Connection

 

 

 


Here’s what you get...
 

The stainless steel metal scraper is hollow ground on both edges for maximum sharpness and is an important part of the Wood Doctor repair process. It is also used to remove dirt, overspray, drips and excess filler.
The finishing planer is used to bring the level of filler to the same height as the surrounding surface. It contains two pieces of Scotch-Brite used to bring the repair to the finish of the surrounding area.
The butane hot knife melts the thermo-plastic polymer color bars into the areas that are in need of repair. Unlike soft wax repair systems, these durable polymer color bars have a high melting point which allow Wood Doctor and Ceramic/Vinyl Doctor to be used for permanent repairs in high-traffic areas and outdoor applications.

A wire holder is also provided for the butane hot knife. Always place the knife on its holder when not in use.

A selection of sixteen thermo-plastic polymer bars are provided in a wide range of colors which can be used singly or mixed to match virtually any color and shade of wood floor.
The colors of the polymer bars in Ceramic/Vinyl Doctor can also be mixed and matched to duplicate the common colors of tile materials
A selection of edge preparation pens in a range of colors are used to prepare the edges of damaged areas and also to match wood grain.


A sturdy plastic carrying case contains the complete Wood and Ceramic/Vinyl Doctor repair kits.		 Contents:
DESCRIPTION                      PART NO.
 Finishing Planer                     WD161.500
Hollow Ground Scraper           WD406
Hot Knife                               WD439
Wire Stand, Hot Knife             WD440
Felt Pad W/Abrasive               WD420
Felt Pad, Smooth                   WD419
Edge Preparation Pens:
Natural Light EP1
Beech Edge EP6
Cherry Wood EP3
Mahogany EP9
Thermo-Plastic Polymer:
Wood                Ceramic/Vinyl
Doctor               Doctor
TPP103             TPP103
TPP109             TPP109
TPP113             TPP110
TPP114             TPP113
TPP119             TPP143
TPP120             TPP158
TPP122             TPP201
TPP157             TPP205
TPP158             TPP206
TPP160             TPP303
TPP162             TPP350
TPP205             TPP980
TPP302             TPP1028
TPP402             TPP3000
TPP417             TPP5002
TPP900             TPP6005
Carrying Case WD500
   

 


Here’s how easy it is to make quick, durable repairs and touch-ups with Wood Doctor and Ceramic/Vinyl Doctor repair kits from Taylor Tools.
 

1. Prepare damaged area by removing all loose wood fibers, chips, etc.
2. If the damaged area is across the grain of the wood, use the scraper to cut small v-shapes into the damage in the same direction as the grain.
3. Pre-color the edges of the damage with one of the edge preparation pens that most closely matches the color of the wood. The darker the wood, the more important this step is.
4. Light the hot knife by pushing the square thumb switch forward, turn the volume knob counter-clockwise to high.
Place the striker next to the mantle and flip the flint wheel.
Turn the volume down to a medium temperature to prevent burning the filler material.

5. Select the colors to be used by finding 2 or 3 colors that closely match the lightest, mid-tone and darkest areas of the finish. You can always change or add colors if necessary.
6. Melt small amounts of each color, beginning with the lightest color, and apply to the damage by placing the tip of the hot knife into the damage and stirring the melted material into all the voids.
Alternatively, you can melt varying amounts of colors on a separate surface such as the scraper until satisfied with the color match. Transfer the resulting mixture into the damage with the tip of the knife.
7. While the material is still soft, place the scraper flat on the surface and press to cool and flatten the polymer material while forcing it into any voids in the damaged area.

8. Holding the scraper at an angle, remove excess polymer in a back hand motion.
9. Remove additional excess material with the finishing planer until the filler material is level with the surrounding surface.
10. Finish blending by rubbing the area with the Scotch-Brite.
11. Add grain to the repaired area by either of the following methods:
A. Use the scraper, needle or other sharp point to cut a grain pattern into the repaired area. Choose the appropriate color of polymer and melt a small amount into the grain pattern. Remove excess with finishing planer.

B. Use the appropriate color of edge preparation pen to carefully draw the grain on the repaired area
Blend the finished area with the
Scotch-Brite.
NOTE:
Inside the finishing planer is
a serrated edge used to clean the grooves on the planer.
Use a butane cartridge to refill the hot knife.

Always set hot knife on wire holder when not in use:
CAUTION: the knife and the wire holder are HOT!		 CERAMIC/VINYL DOCTOR

The Ceramic/Vinyl Doctor contains the same tools as the Wood Doctor but incorporates a different selection of colors for the thermoplastic polymer bars.

Application instructions for the Ceramic/Vinyl Doctor are the same as for the Wood Doctor.

Remember, practice makes perfect, and with a little practice using Wood or Ceramic/Vinyl Doctor, you will be able to quickly and easily touch-up and repair a wide range of imperfections and impairments to wood, ceramic or resilient flooring, countertops, plastic laminate, cabinets, trim and other surfaces.		  

 
Part No. Color Description Pkg. Qty. Price  
Replacement Pens And Thermo Plastic
CD-911   Ceramic/Vinyl Doctor Kit 1 $281.80  
CD-911-1003   Polymer Kit, Ceramic 1 $97.60  
WD-911   Wood Doctor Repair Kit 1 $281.80  
WD-911-1002   Wood Polymer Kit 1 $91.00  
WD-911-5542 Natural Light Replacement Pen 1 $11.00  
WD-911-5547 Beech Replacement Pen 1 $11.00  
WD-911-5550 Mahogany Replacement Pen 1 $11.00  
WD-911-5544 Cherry Wood Replacement Pen 1 $11.00  
TPP-1028 Melon Yellow Replacement Thermo Plastic 1 $9.50  
Replacement Pens And Thermo Plastic
TPP -109 Light Walnut Replacement Thermo Plastic 1 $9.50  
TPP-103 Cherry Wood Replacement Thermo Plastic 1 $9.50  
TPP-110 Medium Walnut Replacement Thermo Plastic 1 $9.50  
TTP-113 Light Mahogany Replacement Thermo Plastic 1 $9.50  
TPP-114 Dark Mahogany Replacement Thermo Plastic 1 $9.50  
TTP-119 Light Pearwood Replacement Thermo Plastic 1 $9.50  
TPP-120 Dark Pearwood Replacement Thermo Plastic 1 $9.50  
TPP-122 Dark Macore Replacement Thermo Plastic 1 $9.50  
TPP-143 Dark Oak Replacement Thermo Plastic 1 $9.50  
TPP-157 Mud Oak Replacement Thermo Plastic 1 $9.50  
TPP-158 Light Beech Replacement Thermo Plastic 1 $9.50  
TPP-160 Medium Alder Replacement Thermo Plastic 1 $9.50  
TPP-162 Alder Replacement Thermo Plastic 1 $9.50  
TPP-201 Birch/Maple/Ash Replacement Thermo Plastic (10 pack) 1 $9.50  
Replacement Pens And Thermo Plastic
TPP-205 Medium Spruce Replacement Thermo Plastic 1 $9.50  
TPP-206 Medium Pine Replacement Thermo Plastic 1 $9.50  
TPP-3000 Flame Red Replacement Thermo Plastic 1 $9.50  
TPP-302 Rustic Oak 2 Replacement Thermo Plastic 1 $9.50  
TPP-303 Rustic Oak 3 Replacement Thermo Plastic 1 $9.50  
TPP-350 White Replacement Thermo Plastic 1 $9.50  
TPP-402 Light Wood Color 402 Replacement Thermo Plastic 1 $9.50  
TPP-417 Light Wood Color 417 Replacement Thermo Plastic 1 $9.50  
TPP-5002 Ultramarine Blue Replacement Thermo Plastic 1 $9.50  
TPP-6005 Moss Green Replacement Thermo Plastic 1 $9.50  
TPP-900 Light Transparent Replacement Thermo Plastic 1 $9.50  
TPP-980 Black Transparent Replacement Thermo Plastic 1 $9.50  
 
WD-6015   Hot Knife 1 $160.70  
WD-161-500   Finishing Planner 1 $32.20  
WD161.500   Hollow Ground Scraper 1 $33.10  

Bottom Border